A Technique for Direct Retrieval of Surface Specific Humidity Over Open Oceans from Irs-P4/Msmr Satellite Data     

Randhir Singh  B. Simon  P. C. Joshi 《Boundary-Layer Meteorology》2003,106(3):547-559

The Multi frequency Scanning Microwave Radiometer (MSMR) onboard Oceasat-1 was used to develop a retrieval method fornear-surface specific humidity by means of multivariate regressiontechnique. The MSMR measures the microwaveradiances in 8 channels at the frequencies of 6.6, 10.7, 18 and 21 GHzfor both vertical and horizontal polarizations. Regression coefficients were derived using the ship reports of the Comprehensive Ocean-Atmosphere Data Set (COADS) for the months of July, October and December, in 1999. Daily near-surface specific humidity data from COADS in 2° × 2° latitude/longitude bins and collocated brightness temperature data from MSMR were used to derive the coefficients. The derived coefficients werevalidated with humidity given in COADS.A linear relationship is established to determine the near-surface specifichumidity from MSMR brightness temperature (Tb) with an rms error of 1.2 g kg^-1 for individual situations and an rms errorof 0.84 g kg^-1 for monthly time scales over global oceans.The retrieval algorithm is validonly for the open sea regions.  相似文献   

Site suitability evaluation for locating sewage treatment plants using remote sensing and gis — a case study of phillaur and phagwara townships in punjab     

P K Litoria  Ajay Mathur  P K Sharma  Charan kamal Singh 《Journal of the Indian Society of Remote Sensing》1997,25(4):261-272

Level-II urban land use information available in this Town and Country Planning maps, Survey of India toposteets for Phillaur and Phagwara towns and the land use information generated through visual interpretation of satellite data was digitized, integrated and analysed using PAMAP GIS. The land use map of the two towns suggest that the wastelands located near the point of present disposal can be utilised for siting sewage treatment plants in both the towns. The STP sites suggested were away from the thickly habttared area. It was observed that some of the areas earmarked for locating STP’s, were partially brought under habitation before the execution of the preject. Hence, it is necessary that planning and execution of such projects should be done on a real time basis so that the sites identified for locating STP’s are not brought under other land uses.  相似文献   

The Zihuatanejo, Mexico, earthquake of 1994 December 10 (M= 6.6): source characteristics and tectonic implications     

M. Cocco  J. Pacheco  S. K. Singh  F. Courboulex 《Geophysical Journal International》1997,131(1):135-145

An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.  相似文献   

Sensitivity study of seismic reflection/refraction data     

F. A. Neves  S. C. Singh 《Geophysical Journal International》1996,126(2):470-476

  相似文献   

Dehydration melting of tonalites. Part I. Beginning of melting     

J. Singh  Wilhelm Johannes 《Contributions to Mineralogy and Petrology》1996,125(1):16-25

 The beginning of dehydration melting in the tonalite system (biotite-plagioclase-quartz) is investigated in the pressure range of 2–12 kbar. A special method consisting of surrounding a crystal of natural plagioclase (An₄₅) with a biotite-quartz mixture, and observing reactions at the plagioclase margin was employed for precise determination of the solidus for dehydration melting. The beginning of dehydration melting was worked out at 5 kbar for a range of compositions of biotite varying from iron-free phlogopite to iron-rich Ann₇₀, with and without titanium, fluorine and extra aluminium in the biotite. The dehydration melting of phlogopite + plagioclase (An₄₅) + quartz begins between 750 and 770°C at pressures of 2 and 5 kbar, at approximately 740°C at 8 kbar and between 700 and 730°C at 10 kbar. At 12 kbar, the first melts are observed at temperatures as low as 700°C. The data indicate an almost vertical dehydration melting solidus curve at low pressures which bends backward to lower temperatures at higher pressures (> 5 kbar). The new phases observed at pressures ≤ 10 kbar are melt + enstatite + clinopyroxene + potassium feldspar ± amphibole. In addition to these, zoisite was also observed at 12 kbar. With increasing temperature, phlogopite becomes enriched in aluminium and deficient in potassium. Substitution of octahedral magnesium by aluminium and titanium in the phlogopite, as well as substitution of hydroxyl by fluorine, have little effect on the beginning of dehydration melting temperatures in this system. The dehydration melting of biotite (Ann₅₀) + plagioclase (An₄₅) + quartz begins 50°C below that of phlogopite bearing starting composition. Solid reaction products are orthopyroxene + clinopyroxene + potassium feldspar ± amphibole. Epidote was also observed above 8 kbar, and garnet at 12 kbar (750°C). The experiments on the iron-bearing system performed at ≤ 5 kbar were buffered with NiNiO. The f _{O 2} in high pressure runs lies close to CoCoO. With the substitution of octahedral magnesium and iron by aluminium and titanium, and replacement of hydroxyl by fluorine in biotite, the beginning of dehydration melting temperatures in this system increase up to 780°C at 5 kbar, which is 70°C above the beginning of dehydration melting of the assemblage containing biotite (Ann₅₀) of ideal composition. The dehydration melting at 5 kbar in the more iron-rich Ann₇₀-bearing starting composition begins at 730°C, and in the Ann₂₅-bearing assemblage at 710°C. This indicates that quartz-biotite-plagioclase assemblages with intermediate compositions of biotite (Ann₂₅ and Ann₅₀) melt at lower temperatures as compared to those containing Fe-richer or Mg-richer biotites. This study shows that the dehydration melting of tonalites may begin at considerably lower temperatures than previously thought, especially at high pressures (>5 kbar). Received: 27 December 1995 / Accepted: 7 May 1996  相似文献   

Dehydration melting of tonalites. Part II. Composition of melts and solids   总被引：6，自引：0，他引：6  

J. Singh  Wilhelm Johannes 《Contributions to Mineralogy and Petrology》1996,125(1):26-44

 Dehydration melting of tonalitic compositions (phlogopite or biotite-plagioclase-quartz assemblages) is investigated within a temperature range of 700–1000°C and pressure range of 2–15 kbar. The solid reaction products in the case of the phlogopite-plagioclase(An₄₅)-quartz starting material are enstatite, clinopyroxene and potassium feldspar, with amphiboles occurring occasionally. At 12 kbar, zoisite is observed below 800°C, and garnet at 900°C. The reaction products of dehydration melting of the biotite (Ann₅₀)-plagioclase (An₄₅)-quartz assemblage are melt, orthopyroxene, clinopyroxene, amphibole and potassium feldspar. At pressures > 8 kbar and temperatures below 800°C, epidote is also formed. Almandine-rich garnet appears above 10 kbar at temperatures ≥ 750°C. The composition of melts is granitic to granodioritic, hence showing the importance of dehydration melting of tonalites for the formation of granitic melts and granulitic restites at pressure-temperature conditions within the continental crust. The melt compositions plot close to the cotectic line dividing the liquidus surfaces between quartz and potassium feldspar in the haplogranite system at 5 kbar and a _{H 2O} = 1. The composition of the melts changes with the composition of the starting material, temperature and pressure. With increasing temperature, the melt becomes enriched in Al₂O₃ and FeO+MgO. Potash in the melt is highest just when biotite disappears. The amount of CaO decreases up to 900°C at 5 kbar whereas at higher temperatures it increases as amphibole, clinopyroxene and more An-component dissolve in the melt. The Na₂O content of the melt increases slightly with increase in temperature. The composition of the melt at temperatures > 900°C approaches that of the starting assemblage. The melt fraction varies with composition and proportion of hydrous phases in the starting composition as well as temperature and pressure. With increasing modal biotite from 20 to 30 wt%, the melt proportion increases from 19.8 to 22.3 vol.% (850°C and 5 kbar). With increasing temperature from 800 to 950°C (at 5 kbar), the increase in melt fraction is from 11 to 25.8 vol.%. The effect of pressure on the melt fraction is observed to be relatively small and the melt proportion in the same assemblage decreases at 850°C from 19.8 vol.% at 5 kbar to 15.3 vol.% at 15 kbar. Selected experiments were reversed at 2 and 5 kbar to demonstrate that near equilibrium compositions were obtained in runs of longer duration. Received: 27 December 1995 / Accepted: 7 May 1996  相似文献   

Landslide hazard and risk assessment mapping of mountainous terrains - a case study from Kumaun Himalaya, India     

R. Anbalagan  Bhawani Singh 《Engineering Geology》1996,43(4):237-246

Landslides are studied systematically in order to evaluate the nature of hazard and the damages to the human life, land, roads, buildings and other properties. This can be expressed in terms of risk, which is a function of hazard probability and damage potential. A risk map will indicate the priorities for landslide hazard management. A new approach to risk assessment mapping using a risk assessment matrix (RAM) is presented.  相似文献   

Effect of tunnel depth on modulus of deformation of rock mass   总被引：1，自引：2，他引：1  

M. Verman  B. Singh  M. N. Viladkar  J. L. Jethwa 《Rock Mechanics and Rock Engineering》1997,30(3):121-127

Summary Deformability of rock mass significantly influences its behaviour and is, therefore, an important consideration for the design of underground openings. The modulus of deformation of rock mass is, however, normally obtained from expensive and time-consuming uniaxial jacking tests, whose results often have a large scatter. An empirical correlation has, therefore, been proposed for a quick and inexpensive preliminary estimation of the modulus of deformation of rock mass on the basis of field instrumentation carried out in tunnels in India.  相似文献   

Effect of class-interval size on entropy     

V. P. Singh 《Stochastic Environmental Research and Risk Assessment (SERRA)》1997,11(5):423-431

The value of Shannon entropy for a given set of data depends on the class interval chosen to compute the relative frequency of each class. For three data sets, expressed in dimensional as well as nondimensional form, the entropy value was computed for different class-interval sizes. Entropy was found to decrease with increasing class interval as well as with increasing sampling interval. It is suggested that these intervals should be selected with care.  相似文献   

Empirical Orthogonal Function (EOF) analysis of monsoon rainfall and satellite-observed outgoing long-wave radiation for Indian monsoon: a comparative study   总被引：3，自引：0，他引：3  

C. V. Singh 《Meteorology and Atmospheric Physics》2004,85(4):227-234

Summary The present study involves the use of Empirical Orthogonal Function (EOF) analysis/Principal Component Analysis (PCA) to compare the dominant rainfall patterns from normal rainfall records over India, coupled with the major modes of the Outgoing Long-wave Radiation (OLR) data for the period (1979–1988) during the monsoon period (June–September). To understand the intraseasonal and interannual variability of the monsoon rainfall, daily and seasonal anomalies have been obtained by using the (EOF) analysis. Importantly, pattern characteristics of seasonal monsoon rainfall covering 68 stations in India are highlighted.The purpose is to ascertain the nature of rainfall distribution over the Indian continent. Based on this, the percentage of variance for both the rainfall and OLR data is examined. OLR has a higher spatial coherence than rainfall. The first principal component of rainfall data shows high positive values, which are concentrated over northeast as well as southeast, whereas for the OLR, the area of large positive values is concentrated over northwest and lower value over south India apart from the Indian ocean. The first five principal components explain 92.20% of the total variance for the rainfall and 99.50% of the total variance for the outgoing long-wave radiation. The relationship between monsoon rainfall and Southern Oscillations has also been examined and for the Southern Oscillations, it is 0.69 for the monsoon season. The El-Niño events mostly occurred during Southern Oscillations, i.e. Walker circulation. It has been found that the average number of low pressure system/low pressure system days play an important role during active (flood) or inactive (drought) monsoon year, but low pressure system days play more important role in comparison to low pressure systems and their ratio are (16:51) and (13:25) respectively. Significantly, the analysis identifies the spatial and temporal pattern characteristics of possible physical significance.  相似文献